Technisys Logo
Electronic Engineering Graphic
  Electrical Optical Passive Interface Test Equipment Enclosures Other

  T1/E1/RS422 Intfc/Fanout 701095
See other 701095 options below
  Multi-mode line termination or signal splitter solves numerous interface problems.
T1/E1/RS422 Fanout,Type H accepts balanced Bipolar AMI or RS422 level input through a concentric twinax rear panel connector. From AMI input, (2) DATA and (2) CLOCK are extracted and output at balanced RS422 levels. A green LOCK LED indicates when the line signal is phase and frequency locked by internal circuitry. AMI input can be at T1 (1.544 Mbps) or E1 (2.048 Mbps) rates, selectable from the front panel by a rotary switch. DATA and CLOCK can be individually inverted by locking toggle switches on the front panel. When RS422 input is selected, (4) RS422 outputs of the same signal are provided. A red ACTIVITY LED indicates presence of input and the outputs can be inverted (2) at a time from the front panel, by the locking toggle switches.

• Balanced AMI Bipolar or RS422 input
• Input type selected from front panel
• Lock/Activity LED indicator
• Front panel output signal inversion
• Built in test pattern generator controlled from front panel
• Three test patterns available with on board jumpers

On board jumper capability
• Output can be source terminated or left open
• Invert functions can be overridden for each output
• AMI output can be decoded or run in transparent mode


These modules are available with the same features however, each have different outputs.

Part Number    Input Output Data Rates
701095           T1/E1/RS422 RS422 RS422 up to 50 Mbps
701095-1        T1/E1/RS422/LVDS RS422/LVDS/ECL T1 - 1.544 Mbps
701095-2        T1/E1/LVDS LVDS E1 - 2.048 Mbps
701095-2L      T1/E1/LVDS LVDS



Technisys Inc
65 Cooper Street
Woodbury NJ 08096