Search

 

 

Technisys Logo
Electronic Engineering Graphic
  Electrical Optical Passive Interface Test Equipment Enclosures Other

       
 

8 Channel E1/T1 CDR (Clock Data Recovery)
8 Channel E1/T1 CDR (Clock Data Recovery) w/ECL Output

701319
701319-1

   
  Description:
 

The Technisys 8 Channel E1/T1 CDR is a stand-alone device designed to provide conversion of 8 Channels of E1 or T1 Line Inputs to recovered Clock/Data pairs at NRZ levels. The NRZ differential outputs are via RJ-45 connectors, and the E1/T1 Line inputs are via Concentric Twinax connectors. Line LOCK for each channel is indicated by front panel LEDs. The Line Interface (E1/T1) and corresponding data rate (2.048MHz/1.544MHz) are selected by a front panel switch. All channels operate at the same rate. Front panel switches provide the ability to select DECODING for each channel.

The unit also contains a Test Pattern Generator, which provides R3, R7, R15, R20 PRBS patterns, and All Ones pattern. Selection is made via front panel 5-position rotary switch. Yellow LEDs indicate the pattern selected. When the Test Generator FRAMED Mode is selected, the PRBS patterns are mapped into the payload of E1 or T1 frames, as selected by the T1/E1 System Rate Switch. Output from the Test Generator may be directly connected to the NRZ inputs via a straight-through cable with RJ-45 connectors.


Additional Models Available
Ina addition to this model, Technisys also offers units for CLOCK/DATA conversion to E1/T1 Line output and E1/T1 Line Rate Conversion. These units, P/N 701309 & 701321 respectively, are available in the same 1U package, which includes auto-ranging AC Mains. Please contact Technisys for more details.

  Features:
 

• Provides 8 Channels of CDR line termination from E1 or T1 Telecommunications signals.
• RS-422 or LVDS Level NRZ Clock and Data Outputs.
• Optional ECL Output.
• Contains a Test Pattern Generator with RS-422 or LVDS Level NRZ Clock and Data output for downstream system test.
• Produces framed ITU-T G.732 or unframed PRBS patterns per ITU-T O.153.
• E1 Framing parameters: TS16 Signaling - Off, CRC4 – Off, International Bit = 1, National Bits = 11111.
• T1 Framing parameters: SF/D4 framing, No AB Signaling.
• Signal Phase LOCK indicators for each channel.
• Decoded or transparent throughput selected by front panel switch individually for each channel.
• Standard 1U rack mountable.
• Powered from 120/240VAC auto-ranging.

  Physical:
  • Height: 1.75" (1U)
• Width: 19"
• Depth: 14"
• Weight: Approximately 5 lbs.
  Power requirements:

 

 

•85-264VAC
•15 Watts maximum

701319 8 Channel E1/T1 CDR

 

Technisys Inc
65 Cooper Street
Woodbury NJ 08096
856-848-9001